Pioneer SX Platform (1528mm x 1236mm) | Rhino-Rack
Rhino-Rack Logo

Pioneer SX Platform (1528mm x 1236mm)

All prices are listed in AUD & exclude freight & fitting charges
$978.00 AUD (RRP inc GST)

The Pioneer SX Platform is a sleek and stylish load carrying solution for your vehicle. Made with strong, durable and lightweight reinforced nylon and aluminium, these non-corrosive Pioneer SX Platforms have been tested in the most rugged conditions and have passed with flying colours.


Designed for rapid use when loading and unloading equipment, adventure gear or tools. Simply slide your gear onto the Pioneer SX Platform and tie down directly to the bars. The flat platform creates the extra space you need to load up your off-road accessories like the Rhino-Rack luggage bags, jerry can holders, spare wheel holders, shovels and loads more. The versatility of the Rhino-Rack Pioneer SX Platform is what makes it stand out amongst any competition.

Rhino-Rack also offers the flexibility of allowing you to purchase removable rail kits. The removable aspect allow your vehicle to lower its height if necessary. The entire Pioneer SX Platform system is also easily installed and removed for when you want to clean the vehicle thoroughly.


  • Stylish and aerodynamically designed
  • minimise wind drag and noise on the road
  • Non-corrosive so it won't rust or fade
  • Made from strong and durable materials and allows you maximum carrying capacity
  • Bars included with the Pioneer SX Platform
  • Compatible with many Rhino-Rack accessories
  • Additional rail kits are available


# Of Planks
Cross Bars Inc
External Dimensions
Length 1528
Width 1236
Height 39
Pioneer Systems
5 Years

Product Compatibility

All prices are listed in AUD & exclude freight & fitting charges


We would love to have your feedback on the Pioneer SX Platform (1528mm x 1236mm).

  1. Please add 5 and 2 and type the answer here: 400 characters remaining


Q1. How do I know if removable roof rails will fit my Pioneer SX Platform?

A1. There is a link in the product compatibility section that will verify which rails suit which Pioneer SX Platforms.

Q2. What tools do I need to fit this system?

A2. You will need a Electric Drill, Tape Measure, Pilot Drill, 8mm Drill Bit, Stanley Knife, Rubber Mallet, 5mm Security Allen Key which is provided in kit.

Product Breakdown - What you get

Article Number JA0085 is made up of the following parts

All prices are listed in AUD & exclude freight & fitting charges

Fits Vehicle

TOYOTA Prado 150 Series 3dr 4WD With Roof Rails 11/09 to 10/17

TOYOTA Prado 150 Series 5dr 4WD With Roof Rails 11/09 to 10/17

BMW X3 E83 4dr 4WD With Roof Rails 07/04 to 02/11

SUBARU Forester 5dr Wagon With Roof Rails 03/08 to 12/12

SUZUKI Jimny 2dr Wagon With Roof Rails 10/98 to 10/17

JEEP Cherokee KL 5dr SUV With Roof Rails 01/14 to 10/17

NISSAN Navara NP300 4dr Ute Dual Cab (with Roof Rails) 07/15 to 10/17

SUBARU Forester SJ 5dr SUV With Roof Rails 02/13 to 10/17

VOLVO XC70 5dr Wagon With Roof Rails 09/00 to 11/07

VOLVO XC70 5dr Wagon With Roof Rails 12/07 to 10/17

SUBARU XV 5dr Hatch With Roof Rails 01/12 to 05/17

Rhino-Rack Solutions for

Don’t see your manufacturer below? View all Manufacturers
Rhino-Rack Logo
Terms and Conditions Privacy Policy Environmental Policy Site Map

© Copyright Rhino-Rack Pty Ltd (ABN 63 122 680 639), 1992 - 2017